FAQ

1

Products

Q.
No Tin Whisker Risk in TDK MLCCs (1): What material is used for the internal electrodes and terminal electrodes?
  • Multilayer Ceramic Chip Capacitors
Q.
No Tin Whisker Risk in TDK MLCCs (2): How does TDK ensure the tin finish will not promote whisker growth?
  • Multilayer Ceramic Chip Capacitors
Q.
No Tin Whisker Risk in TDK MLCCs (3): How does TDK test for Sn whisker?
  • Multilayer Ceramic Chip Capacitors
Q.
Do the capacitors (Multilayer Capacitors with Leads) support solder bonding?
  • MLCC with Dipped Radial Lead
Q.
Among the capacitors (Multilayer Capacitors with Leads), are there products that withstand a temperature of 150°C?
  • MLCC with Dipped Radial Lead
Q.
Is the insulation coating used for the capacitors (Multilayer Capacitors with Leads) flame retardant?
  • MLCC with Dipped Radial Lead
Q.
Can the capacitors (Multilayer Capacitors with Leads) be used with AC voltages at commercial frequencies?
  • MLCC with Dipped Radial Lead
Q.
Can the capacitors (Multilayer Capacitors with Leads) support reflow soldering?
  • MLCC with Dipped Radial Lead
Q.
Can the capacitors (Multilayer Capacitors with Leads) be used with their leads bent?
  • MLCC with Dipped Radial Lead
Q.
What cleaning method is recommended for the capacitors (Multilayer Capacitors with Leads)?
  • MLCC with Dipped Radial Lead
Q.
Data on the electrical characteristics of products with Y5V characteristics is needed when looking for a replacement with Y5V characteristics that TDK no longer manufactures. What needs to be done?
  • Multilayer Ceramic Chip Capacitors
Q.
Please explain why capacitors are used as noise suppression components.
  • Multilayer Ceramic Chip Capacitors
Q.
Is an explanation of the basics of an inductor (a coil) available?
Q.
Please explain how an inductor (a coil) functions.
Q.
Why is inductance specified by numbers such as 1, 1.5, 2.2, 3.3, etc.?
Q.
Would it be safe to use an inductor in which a current exceeding the rated current flows momentarily?
Q.
Would it be a problem to use inductors in parallel?
Q.
I would like to use high frequency inductors for impedance matching. Which products do you recommend?
Q.
I do not understand how the direction identification markings on the MLG/MHQ series inductors correspond to each other.
Q.
Which inductor is recommended for smoothing a power circuit?
Q.
Why are the characters such as "4R7" or "100" printed on some products?
Q.
Where can chip beads be used to serve as effective EMC components?
  • Chip Beads
Q.
Since chip beads are EMC components, is there any need to make ground connections?
  • Chip Beads
Q.
Would it be a problem to use chip beads in parallel?
  • Chip Beads
Q.
There are no marks on chip beads that indicate winding direction (polarity). Do different directions at mounting result in changes in characteristics?
  • Chip Beads
Q.
Does TDK offer chip bead arrays (products that have multiple elements in one package)?
  • Chip Beads
Q.
Would it be safe to use a chip bead in which a current exceeding the rated current flows momentarily?
  • Chip Beads
Q.
What is the Gigaspira bead?
  • Chip Beads
Q.
Why are common mode filters / chokes necessary?
  • Signal Line Common Mode Chokes/Filters
Q.
In which locations can common mode filters (common mode chokes) be effectively used as EMC countermeasure components?
  • Signal Line Common Mode Chokes/Filters